HP Victus 16-E G3MQ DAG3MQMBAE0 REV E Schematics & Boardview

HP Victus 16-E G3MQ DAG3MQMBAE0 REV E schematics, boardview, bitmap, and PCB layout files are available for laptop repair technicians working on board-level diagnostics, power rail tracing, and component-level fault finding. These files provide the reference data needed to follow the power-on sequence, locate failed components, and verify voltages against the designed values.

HP Victus 16-E G3MQ DAG3MQMBAE0 REV E Hardware Solutions

HP Victus 16-E G3MQ DAG3MQMBAE0 REV E No Power and Dead Board Solution

this device completely dead, no power light, and no standby voltage diagnosis.

HP Victus 16-E G3MQ DAG3MQMBAE0 REV E DC Jack and Charging Port Solution

this device DC jack replacement, adapter detection, and charging port faults.

HP Victus 16-E G3MQ DAG3MQMBAE0 REV E Charging IC and Battery Solution

this device battery not charging, charging IC faults, and battery detection circuits.

HP Victus 16-E G3MQ DAG3MQMBAE0 REV E Power Sequence Solution

this device S5 to S3 to S0 power-on sequence, enable signals, and power good lines.

HP Victus 16-E G3MQ DAG3MQMBAE0 REV E EC Embedded Controller Solution

this device EC chip faults, EC firmware, and power button signal tracing.

HP Victus 16-E G3MQ DAG3MQMBAE0 REV E CPU Core Voltage and VRM Solution

this device VCCIN rail, CPU VRM circuit, and core voltage not generating.

HP Victus 16-E G3MQ DAG3MQMBAE0 REV E RAM and DDR Voltage Solution

this device no boot with RAM installed, DDR VTT and VREF rails, and slot repair.

HP Victus 16-E G3MQ DAG3MQMBAE0 REV E PCH and Chipset Solution

this device PCH faults, chipset reballing, and platform clock issues.

HP Victus 16-E G3MQ DAG3MQMBAE0 REV E LCD Display and eDP Solution

this device no display, eDP and LVDS signal tracing, and panel connector faults.

HP Victus 16-E G3MQ DAG3MQMBAE0 REV E LCD Backlight Solution

this device dim screen, backlight driver circuit, and LED boost converter repair.

HP Victus 16-E G3MQ DAG3MQMBAE0 REV E Graphics and GPU Solution

this device GPU faults, dedicated graphics power rails, and external monitor output.

HP Victus 16-E G3MQ DAG3MQMBAE0 REV E Keyboard and Touchpad Solution

this device keyboard not working, touchpad faults, and FPC connector repair.

HP Victus 16-E G3MQ DAG3MQMBAE0 REV E USB and Type-C Port Solution

this device USB ports not detecting, Type-C circuit, and port power faults.

HP Victus 16-E G3MQ DAG3MQMBAE0 REV E Audio Codec and Speaker Solution

this device no sound, audio codec faults, and speaker amplifier circuits.

HP Victus 16-E G3MQ DAG3MQMBAE0 REV E WiFi Bluetooth and M.2 Solution

this device wireless card not detected, M.2 slot power, and antenna circuits.

HP Victus 16-E G3MQ DAG3MQMBAE0 REV E LAN and Ethernet Solution

this device Ethernet port not working, LAN controller, and magnetics faults.

HP Victus 16-E G3MQ DAG3MQMBAE0 REV E SSD NVMe and SATA Solution

this device drive not detected, NVMe and SATA slot power rails, and data lines.

HP Victus 16-E G3MQ DAG3MQMBAE0 REV E Fan and Thermal Shutdown Solution

this device fan not spinning, thermal sensor faults, and overheating shutdown.

HP Victus 16-E G3MQ DAG3MQMBAE0 REV E RTC and CMOS Battery Solution

this device time reset, RTC circuit, and CMOS battery voltage faults.

HP Victus 16-E G3MQ DAG3MQMBAE0 REV E Webcam and Card Reader Solution

this device webcam not detected and SD card reader circuit repair.

HP Victus 16-E G3MQ DAG3MQMBAE0 REV E Component Names and Test Points

Identify this device motherboard components, reference designators, and test points.

Motherboard Diagram and Circuit Information

The motherboard's power distribution starts with the adapter, which generates the 19V rail that's fed to the VRM. The VRM then generates the VCCIN rail, which is used to power the EC. The EC releases the power-good chain, signaling the power rails are stable. The 3V and 5V always-on rails are brought up in sequence, with S5/S3/S0 power sequencing controlling the flow of power to the components.

Schematics File

The schematics file provides the blueprints for this board's circuitry, giving technicians a detailed understanding of how the components interact. By following the power-on sequence from the adapter to the CPU, technicians can identify the root cause of a failure and plan repairs accordingly.

Follow the power-on sequence from the adapter to the CPU
Trace always-on rails, enable lines, and power-good signals
Identify the component behind a shorted or missing rail
Check EC, PCH, and clock connections against the design
Plan component-level repairs using pinout and net data

Boardview and Bitmap

The boardview and PCB layout files provide a visual representation of the board's physical layout, allowing technicians to quickly locate components and trace nets. With the boardview, technicians can see which side of the board a part sits on, making it easier to locate and identify components.

Find any component by reference designator in seconds
See which side of the board a part sits on
Trace a net to every pad it touches
Cross-reference the schematic with the physical layout

Common Faults on This Board

This board's most common faults include no power, no display, not charging, and dead after liquid damage. In each case, the technician needs to identify the root cause of the failure and plan repairs accordingly.

Why These Files Matter

Accurate repair data, provided by these files, shortens diagnosis, prevents guesswork replacements, and improves repair success rates. With the right information, technicians can quickly identify the problem and perform the necessary repairs, reducing the time and cost of the repair process.